湖州附近有没有服务

Current location: home page > Case center > Case center

Product category: case center

Product Name: Tower fog gun

product details



1. Before starting the machine, please check whether the connection is accurate and whether the fasteners are firm.

2. Filling water: screw off the water cap and inject the water into the water tank. It is forbidden to bring sand or debris into the water tank. The water injected into the water tank shall not exceed the upper limit of water level.

3. Start the generator set (please refer to the operation manual of the generator set) and turn on the power switch after normal operation.

4. Raise the pressure regulating handle of water spray pump head to a higher point and turn off the water outlet switch.

5. First press the fan operation button (remote control operation) on the control box. After the fan runs normally, press the spray start button, and the pump head starts to run. Then, lower the pressure regulating handle to a lower level. Adjust the pressure regulating screw to make the pressure gauge number about 25-30kg. Tighten the fixed nut, release the water outlet switch connected to the air duct, and start the spray operation. The air duct can also swing up and down and left and right (remote control operation).

6. After spraying, if it is necessary to stop the machine, first press the spray stop button on the control box, and then press the fan swing stop button and fan stop button (remote control operation is available), and then turn off the generator set.

Mobile phone: 18503928598 company address: South of Bohai Road, Qibin District, Hebi City
Tel: 0392-3384308 email: henanlanhang @ 163.com company website: dianadenissova.com
Website registration number: Yu ICP Bei No. 16010057 All rights reserved by Henan Lanhang Environmental Protection Technology Co., Ltd